貝斯科技股份有限公司
營業項目: Probe Station探針台,Tip holder針桿,GGB 探針探針座,連接線Cable,Adapter,..... LINE ID:charles53131488WeChat ID:bestcharles504
  公司簡介 產品型錄  
 
產品搜尋
 
產品分類
 
1.Probe Station探針台(4吋6吋8吋12吋) ( 18 )
2.Micropositioner 探針座 ( 20 )
3.Tip Holder針桿(Coaxial-Triaxial) ( 15 )
4.Cable連接線(Triaxial-Coaxial) ( 157 )
5.GGB Probe Tip探針(硬探針-軟探針-RF) ( 25 )
8.GGB Picoprobe Arm(主動式) ( 9 )
11.Adapter 轉接頭(Triaxial-Coaxial) ( 14 )
12.Microscope 顯微鏡(Mitutoyo金像顯微鏡-立體顯微鏡) ( 10 )
13.CCD system影像擷取系統 ( 3 )
14.Medo Vacuum pump 真空幫浦 ( 2 )
15.LightBox 光源機 LED 光纖線 ( 4 )
16.Air compressor 空氣壓縮機 ( 6 )
17.Hot Chuck加熱吸盤(4吋 6吋 8吋 12吋) ( 1 )
18.Liquid Crystal液晶 ( 1 )
19.Probe Card Holder ( 1 )
20.Shielding Box黑箱﹠防震桌 ( 4 )
21.Socket-Adapter ( 2 )
22.零件-零組件-CNC加工 ( 6 )
23.X-Y-Z軸精密滑台 ( 3 )
24.焊接工具Division of Circuit Technology Center, Inc. ( 0 )
27.New wave Laser system(雷射系統) ( 1 )
電容式觸控面板線性測試(劃線)機 ( 0 )
ITO阻抗量(二針式電測)機 ( 0 )
28.MicroCare(專業元件清潔劑) ( 1 )
 
聯絡資訊
Tel:886-3-5880088
Fax:886-3-5887878
Mobile :0937-825738
johnny@bestt.com.tw
Member English website
台灣新竹縣新埔鎮文山路犁頭山段777巷3號
 
現在的位置: 產品型錄 5.GGB Probe Tip探針(硬探針-軟探針-RF) 5-6.Calibration Substrate(校正片)\Calibration Substrate

Calibration Substrate

Calibration Substrate
Calibration Substrate
產品編號:
產品價格: 來電洽詢
交貨天數: 請來電洽詢
最少訂購量: 來電洽詢  
詢問產品  
 

Calibration Substrate Selection Guide
Calibration Pad Size(microns)  Calibration Footprint Pitch Range Pitch Range
Substrate Types Supported Recommeded (µm) Acceptable (µm)
CS-5 50 x 50 SOLT, LRL, LRM GSG 75 - 250 75 - 250
CS-9 100 x 100 SOLT, LRL, LRM GSG 250 - 600 150 - 600
CS-10 150 x 150 SOLT, LRM GSG 600 -1250 225 -1250
CS-18 300 x 300 SOLT, LRM GSG 1250 - 2540 500 - 2540
Figure 2
CS-8 50 x 50 SOLT, LRM GS, SG 50 - 200 50 - 300
100 x 100
150 x 150
CS-14 100 x 100 SOLT, LRM GS, SG 200 - 400 150 - 600
CS-11 150 x 150 SOLT, LRM GS, SG 400 - 1250 175 - 1250
CS-17 300x300 SOLT, LRM GS, SG 750-2540 450-2540
Figure 3
Special Calibration Substrate Designed For Use Above 110 GHz
CS-15 25 x 25 SOLT, LRL, LRM GSG 40 - 150 (SOLT) 40 - 150
30 - 150
(LRL)
Table 3
SOLT = Short-Open-Load-Through
LRL = Line-Reflect-Line (Which is equivalent to TRL = Through-Reflect-Line)
LRM = Line-Reflect-Match (Which is equivalent to TRM = Through-Reflect-Match)
Accurate, easy to use calibration substrates, calibration coefficients, and detailed instructions allow you to precisely calibrate the measurement system to the probe tips.  
   
The typical elements for calibrating a microwave measurement system consists of opens, shorts, 50 ohm loads, and throughs. Precision crafted calibration substrates, when properly used, assure you of accurate on-wafer test results.  
   
All load standards are individually inspected and trimmed to within 0.25% accuracy using NIST traceable equipment.  
   
Easy to use step by step instructions are provided for use with Agilent ENA four port network analyzers and Agilent PNA network analyzers with PLTS software.  
Differential Calibration Substrate Selection Guide  
Calibration Pad Size (microns) Calibration Footprint Pitch  
Substrate Types Supported  
CS-2100 50 x 50 SOLT, LRL, LRM GSGSG 100  
CS-2125 50 x 50 SOLT, LRL, LRM GSGSG 125  
CS-2150 50 x 50 SOLT, LRL, LRM GSGSG 150  
CS-2200 50 x 50 SOLT, LRL, LRM GSGSG 200  
CS-2250 50 x 50 SOLT, LRL, LRM GSGSG 250  
CS-2500 100 x 100 SOLT, LRL, LRM GSGSG 500  
Figure 2  
CS-3100 50 x 50 SOLT, LRM GSSG 100  
CS-3125 50 x 50 SOLT, LRM GSSG 125  
CS-3150 50 x 50 SOLT, LRM GSSG 150  
CS-3200 50 x 50 SOLT, LRM GSSG 200  
CS-3250 50 x 50 SOLT, LRM GSSG 250  
CS-3450 100 x 100 SOLT, LRM GSSG 450  
CS-3500 150 x 150 SOLT, LRM GSSG 500  
CS-3600 100 x 100 SOLT, LRM GSSG 600  
CS-3800 300 x 300 SOLT, LRM GSSG 800  
CS-31000 300 x 300 SOLT, LRM GSSG 1000  
CS-31250 300 x 300 SOLT, LRM GSSG 1250  
Figure 3  
SOLT = Short-Open-Load-Through  
LRL = Line-Reflect-Line  
LRM = Line-Reflect-Match  
 
 
Spec.pdf
 
同類產品
 
上一頁 | 回首頁
 
Copyright © www.bestjohnny.tw.bysources.com all right reserved. 廠商管理
網站內刊登文字、圖像皆屬貝斯科技股份有限公司 」所有,非經同意請勿任何轉載、複製。